USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
6.14 Ethernet management port IP address
The Ethernet management port default IP address: 192.168.0.100
The IP address can be set to a different IP address using the command set_ip .
Example:
Notes:
●
New IP address will take effect only after performing device reboot.
●
Remote control via telnet, SSH, WEB or SNMP applications should be reconfigured to
use new IP address.
6.15 Ethernet management port net mask address
The Ethernet management port default net mask address is 255.255.255.0.
The net mask address can be set to different IP address using the command: set_netmask
Example:
Notes:
●
New net mask address will take effect only after performing device reboot.
●
Remote control via telnet, SSH, WEB or SNMP applications should be reconfigured to
use new net mask address
Garland Technology | 716.242.8500 |
42
