USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
6.13.4 Advanced_link (available on the IBS 1G/10G fiber)
Advanced link mode enables the IBS ability to detect Network and Monitor link failure
based on RXdisconnection on the link partner. By default the advanced link is disabled
(off).
Example:
6.13.5 Set_default_advanced_link (available on the IBS 1G/10G fiber)
Advanced link mode enables the IBS ability to detect Network and Monitor link failure
based on RX disconnection on the link partner. By default the advanced link is disabled
(off). It is possible to change the default state of the advanced_link feature using the
command:
set_default_adavnced _link
Example:
6.13.6 Show/Set Internal VLAN ID
The IBS default internal Vlan Id is :1 .
Using the command set_int_vlan it is possible to set the internal vlan id
To command show_int_vlan_id display the current internal vlan id
Example:
Garland Technology | 716.242.8500 |
41
