USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
6.36 Display Ethernet port state (show_link)
The command “show_link XXX” display the port link state.
Where XXX:
●
MON0 – monitor port 0
●
MON1 – monitor port 1
●
NET0 – network port 0
●
NET1 – network port 1
Example:
6.37 Change Ethernet port auto-negotiation status
The command “set_link XXX enable_autoneg|disable_autoneg is used to set Ethernet port
auto negotiation mode. By default auto-negotiation is enabled. This command is supported
only by IBSG devices.
Where XXX:
●
MON0 – monitor port 0
●
MON1 – monitor port 1
●
NET0 – network port 0
●
NET1 – network port 1
Example:
6.38 Display device log file (show_log)
The command show_log displays the IBS log file.
Example:
Garland Technology | 716.242.8500 |
52
