USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
8.5.1.3 Configuration
The IBS supports multi configuration save and restore. Use the scroll down menu to
save new configuration or to restore an existing configuration. The IBS saves these
different configurations on internal flash memory(~1 MB).
8.5.2 configuration area
The IBS supports for remote access (WEB access, SNMP access, SSH access, Telnet
access).
8.5.2.1 state
The sate support the following modes:
●
TACACS off (default: Off)
●
TACACS on , clear text , SNMP on
●
TACACS on , encrypted , SNMP on
●
TACACS on , clear text , SNMP off\
●
TACACS on , encrypted , SNMP off
8.5.2.2 Server Ip
Set the server IP address (default IP : 192.168.0.6)
8.5.2.3 mode
mode allow to view, add and remove additional TACAS+ server (up to 10
servers) and to set the main TACACS server.
8.5.2.4 secret key
Set the secret key (default: default_tac_key)
8.5.2.5 TACACS multi users
Multi users control allows enable/disable multi users mode.
When multi users flag is set, the device will not check the user account, it will
rely on server.
When multi users flag is reset, users can login if the IBS and server
have this account.
8.5.2.6 TACACS Fallback
By default in case that there is no server to validate the login credentials the
login will fail and it will be possible to login to the IBS only via the Serial port.
By setting the fallback to on, it enable the login fallback to the local IBS
credentials.
Garland Technology | 716.242.8500 |
114