USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
6.61.11Set multi users flag.
Multi users control allows enable/disable multi users mode.
When multi users flag is set device will not check the user account, it will rely
on TACACS server.
When multi users flag is reset user can login if the IBS and TACACS server
have this account.
multi users flag can be set by command “set_tacacs_multi_users” (default: on)
6.61.12 Display multi users flag
The state of multi users flag can be displayed by command
“show_tacacs_multi_users”
6.61.13 authorization
When authorization is enabled, the IBS uses information retrieved from the
user profile, which is located either in the local user database or on the
server, to configure the user's session. Once this is done, the user will be granted
access to a requested service only if the information in the user profile allows it.
The IBS Authorization defines 2 user levels.
Read only. Read/write
6.61.13.1 set_authorization_state
By default the authorization is disabled.
The command set_authorization state on/off enable/disable the
Authorization.
Garland Technology | 716.242.8500 |
82
