USER GUIDE
EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2
7.3 SNMP Traps
Trap
Value Description
ibsTrapStart
1
Reserved
ibsTrapApplFail
2
Trap is sent when the Monitor application does not send back the
HB packets within the hold time Interval defined by hb_holdtime
variable.
ibsTrapApplRecover
3
Trap is sent when the Monitor application starts again to send the
HB packets
ibsTrapPasBypassOn
4
Trap is sent when passive bypass changes to bypass mode.
ibsTrapPasBypassOff
5
Trap is sent when passive bypass changes to inline mode.
ibsTrapActBypassOn
6
Trap is sent when active bypass changes to bypass mode.
ibsTrapActInlineOn
7
Trap is sent when active bypass changes to inline mode.
ibsrapMon0LinkDown
8
Trap is sent when monitor port-0 link drops.
ibsTrapMon0LinkUp
9
Trap is sent when monitor port-0 link is restored.
ibsTrapMon1LinkDown
10
Trap is sent when monitor port-1 link drops.
ibsTrapMon1LinkUp
11
Trap is sent when monitor port-1 link is restored.
ibsTrapNet0LinkDown
12
Trap is sent when network port-0 link drops.
ibsTrapNet0LinkUp
13
Trap is sent when network port-0 link is restored.
ibsTrapNet1LinkDown
14
Trap is sent when network port-1 link drops.
ibsTrapNet1LinkUp
15
Trap is sent when network port-1 link is restored.
ibsTrapTermDisc
16
Trap is sent when local serial RS232 connection is disconnected.
ibsTrapTermCon
17
Trap is sent when local serial RS232 connection is connected.
ibsTrapErr
18
Trap is sent as indication of an error within the IBS, with some
description of the error.
ibsTrapLogSize
19
Trap is sent when the log file size exceed its maximum allowed
size.
ibsTrapTapOn
20
This trap is sent when switch changes mode to tap.
ibsTrapUpdate
21
Trap is sent when firmware update is finished.
ibsTrapLinkDropOn
22
This trap is sent when switch changes mode to linkdrop.
ibsTrapUpdateReboot
23
Trap is sent when firmware update is finished and device is
rebooted.
ibsTrapTapi12On
24
Trap is sent when active bypass changes to TAPI12 mode.
ibsTrapTapaOn
25
Trap is sent when active bypass changes to TAPA mode.
ibsTrapTapai1On
26
Trap is sent when active bypass changes to TAPAI1 mode.
ibsTrapTapi2On
27
Trap is sent when active bypass changes to TAPAI2 mode.
ibsTrapTapi12On
28
Trap is sent when active bypass changes to TAPAI12 mode.
ibsTrapPower1OK
29
This trap is sent when power supply 1 restored from failure.
(only for hardware 0.3.0.11 and up)
ibsTrapPower2OK
30
This trap is sent when power supply 2 restored from failure.
(only for hardware 0.3.0.11 and up)
ibsTrapCpuFanOK
31
This trap is sent when CPU FAN restored from failure.
(only for hardware 0.3.0.00 and up)
ibsTrapRxTxError
32
This trap is sent when device detect RX or TX error.
Next trap can be send in 5 sec
Garland Technology | 716.242.8500 |
101