Garland EdgeSafe M10G1ACv2 User Manual Download Page 111

Page: 111 / 139

USER GUIDE

EdgeSafe 10G Modular Bypass | Firmware Rev Level: 0.3.3.2

8.4.3.5 M2N
M2N (monitor port to network port link fail) mode support link drop on network port if

correspondent monitor port link gone. This Mode can be set independent for each

monitor port.

8.4.3.6 M2M
M2M (monitor ports two port link) When enabled (on), if one of the monitor ports link

fails it drops the link on the other monitor port. M2M k is disabled (off) by default.

8.4.4 RX/TX errors processing
The IBS can place itself into Bypass or Linkdrop in case it detects RX/TX errors on the Monitor

ports or on the Network ports.

8.4.4.1 Trap
ON/OFF - turn on or off the Trap on case of error detection.

8.4.4.1 Timeout
Set the timeout for sending the RX/TX traps.

Garland Technology | 716.242.8500 |

garlandtechnology.com/support

111

Summary of Contents for EdgeSafe M10G1ACv2












































































































































Search results

Summary of Contents for EdgeSafe M10G1ACv2

Reviews:

Related manuals for EdgeSafe M10G1ACv2

Brands by name

Popular brands

Garland EdgeSafe M10G1ACv2, User Manual

Search results

Summary of Contents for EdgeSafe M10G1ACv2

Reviews:

Related manuals for EdgeSafe M10G1ACv2

Brands by name

Popular brands