Page
71
Program Orders
As previously mentioned an alternative to entering option numbers with an LCD
keypad is to scroll through the programmable options using the YES and NO keys.
To do this enter the engineer code followed by YES,
the display will show:-
Pressing the NO key will move to the next header;
Pressing the YES key whilst viewing a header will enter into the options under that
header;
Pressing 0 will escape back one step (except when a numeric entry is required).
Below is given a complete list of headers (
Shown in Bold Underline
), with the options
available below it.
Program . . . . _ _ _
Zones ?
Headers & Options
Program Zones
Zone Types
Zone Descriptors
Zone Wiring
Zone Attributes
(Test/Part/Chime/Cleaner/Walk)
Zone Double Knock/Arm/Log
Zone E/E Mode
Walk On/Off (FWT)
Walk Bypass Time (FWT)
Setting Modes
Setting For Full Sets
Setting For Part 1 Sets
Setting For Part 2 Sets
Setting For Part 3 Sets
Setting Delay
Setting Sounders
Setting Conformation
Auto Part Set
Headers & Options
Entry Times
Entry Time 1
Entry Time 2
Bells / Sounders
Bell Type/No Arms
Bell Delay
Bell & Sounder Ring
Bell Tamper Mode
Bell For Part Set
Keypad / Keyswitch
Keypad Alert 1 Keys
Keypad Alert 2 Keys
Number of Keypads
Multi Keypad Option
Keyswitch Type
Keypad Backlight Mode
GardTec
872
Programming
872.qxd 05/11/2003 15:01 Page 71
