Programming
1) With the display showing:-
2) Enter the Engineer code (1234 default)
The display will show:-
3) Press YES. The display will show:-
This is Engineer Mode
4) Press 131 (option No.) Followed by YES the
display will show:-
5) Press NO until the display shows:-
6) Press YES the display will show:-
7) Select the unit you wish to
program.The display will show:-
8) Pressing NO will place a chevron against the
first option as shown:-
9) Press NO to select if Unit 1is On or Off. When
finished press YES.
10)The chevron will now move to the LED option:-
Page
104
< < < < UN-SET > > > >
01 Jan 00: 00: 01
Do you want to . .
Use ENGNR. Mode ?
Program . . . . _ _ _
Zones ?
NovActive = Off
NovActive = On
Select NovActive
1 - 8
NovA1 = Off LEDS = 0
Confirm = Off
NovA1 > Off LEDS = 0
Confirm = Off
NovA1 = Off LEDS > 0
Confirm = Off
Appendix 1
GardTec
872
872.qxd 05/11/2003 15:01 Page 104
