![background image](http://html.mh-extra.com/html/ganz/pixelpro-gxi-series/pixelpro-gxi-series_user-manual_561092092.webp)
PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
92
5.7.2. PIR
Note: This part is for the camera with passive infrared (PIR) sensor only.
Passive infrared sensor (PIR sensor) is a motion detector that senses object’s radiating infrared
(IR) light in its field of view.
Users can configure the sensor detection intervals by accessing Setup > Peripheral > PIR.
The available intervals range from 0 to 600 seconds.
5.7.3. Serial Port
For the UART setting, go to Setup > Peripheral > Serial Port. The Serial port setting page may
not appear depending on a device type.
Serial port setup
These settings are necessary to allow the telecommunication between your serial devices and
encoder / IP camera. There are default values set for a new device but it can be changed
depending upon the device requirement.
Serial port mode
-
Serial Port (RS485): This is used when you want to control a PTZ camera or the serial
device with the selected PTZ protocol embedded in a device. For detailed information on
the embedded protocols, please see 5.8.4. Protocols.
-
SerialOverIP: Used to enable the communication for the devices connected to the serial
ports of an encoder
SerialOverIP
This section is enabled only when you select SerialOverIP for the serial port mode.
Select the desired communication mode: UDP, TCP Client, or TCP Server. Once the mode has
been selected, type the IP address of client and port number in the text boxes of SerialOverIP
section.
Summary of Contents for PixelPro GXi Series
Page 1: ... FW Version 1 12 0 8 ...