![background image](http://html.mh-extra.com/html/ganz/pixelpro-gxi-series/pixelpro-gxi-series_user-manual_561092027.webp)
PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
27
Digital Wide Dynamic Range (DWDR)
This feature ensures clarity in image in the space affected by strong light causing a big contrast
on the spots within the image.
Note
i
DWDR is not available for the thermal camera models.
Note
i
Some camera models do not support the level adjustment slide bar.
Auto Focus Mode (Note: Auto focus mode is available for speed PTZ cameras only.)
Autofocus allows the lens to remain in focus during tele/wide movement. There are three
modes available.
-
Auto: this mode enables to focus automatically.
-
Semi-auto: This mode allows adjusting focus once automatically in the below cases.
PAN/TILT movement
Zoom In/Out
Change Preset position
The PTZ position change by Autorun
-
Manual: This mode allows user to change the focus with Focus Near/Far control.
Day & Night
Three different day/night modes are supported: Auto, Day, and Night. Select the desired mode
based on the installation environment. (Default: Auto). When Auto is selected, the threshold
value for Day to Night Level and Night to Day level can be controlled.
Please note that Night to Day level should always be set higher than Day to Night level.
- Day to Night level: This has range of 0 ~ 63. (Default value is 1)
- Night to Day level: This has range of 1 ~ 64. (Default value is 3)
- Enable illumination sensor: In case there is an inevitable installation environment such as
the illumination sensor covered, it is recommended that you untick the checkbox of Enable
illumination sensor to avoid malfunction of the sensor. The feature, Enable illumination
Summary of Contents for PixelPro GXi Series
Page 1: ... FW Version 1 12 0 8 ...