PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
22
5.2. Video and Audio
To change the setting for video input, burnt-in text, encoder profile, stream, and privacy mask,
go to the Video (& Audio) page by selecting Setup > Video (& Audio). This menu is configured
with the following sub menus: Camera, Repositioning (depending on the device type), Burnt-in
Text, Encoder Profile, Stream and Privacy Mask.
5.2.1. Camera (channel naming/video format/ color control)
The camera setting page provides options to:
Name a channel for the camera
Set image attributes
Adjust the image exposure
Configure Day & Night mode
Configure the image signal processing
Preview the current setting
Rotate image
Stabilize the image
1.
Adjust the camera settings based on the instructions for each component on the
following pages, and click the Apply button to save changes.
2.
Click the View button to see how the image will appear on the View window. Or, click
the Pop-Up button to have a separate pop-up window to preview the image.
General
-
Friendly name: The users may provide friendly name (alias) to an individual device in case
when utilizing multiple channels and devices. Using alias is recommended to distinguish the
device where environment requires multiple image feedbacks with multiple monitoring
devices.
-
Aspect Ratio: There are two modes respectively of 4:3 and 16:9. The 4:3 mode is available
in all the products except for encoders.
Video Appearance
- Brightness: The range is from 0 to 255, the default is 128.
- Contrast: The range is from 0 to 255, the default is 128.
- Saturation: The range is from 0 to 255, the default is 110.
- Sharpness: The range is from 0 to 255, the default is 160.
Note
i
Sharpness is affected by installation environment. Here in the web menu’s
“range” definition is operating range, therefore configuring the right value for
each camera is necessary.
Summary of Contents for PixelPro GXi Series
Page 1: ... FW Version 1 12 0 8 ...