![background image](http://html.mh-extra.com/html/ganz/pixelpro-gxi-series/pixelpro-gxi-series_user-manual_561092042.webp)
PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
42
Note
i
The speed dome cameras have the range limit in tilting.
Thus, the field available for privacy mask is also limited.
5.2.8. Video-Out
Cameras with the video output interface will have the user’s interface like below on the
webpage. To configure the video-output mode, go to Setup > Video & Audio > Video-out.
Select the video-output mode among NTSC, PAL and off according to your intention.
Unless you change the mode, the current selection is maintained.
Note
i
Video Output cannot be configured while any of the features below is activated.
- Image Rotation
- Video Stabilization
W: 60
H: 35
(Center50,45)
T(45)
P(57.5),
W(15)
H(8.75)
< Example of Privacy Mask shown on the screen >
How to draw the privacy mask above
Let’s suppose there is an object you want to hide inside the privacy mask zone.
The center of the camera is located at the coordinate, (50, 45) of pan and tilt, and the
horizontal and vertical view angles are 60 and 35 respectively.
1.
Let’s define the initial point to cover the object.
The object is away toward the right by 1/4 horizontally and on the same line
vertically from the center. Thus, the values of the initial point are 57.5 and 45, which
are respectively P value and T value.
2.
To fully cover the object horizontally, there needs to be two squares from the red
point(P,T) to the right, whose width is 2/4(=15). Therefore the W value is 15.
3.
To fully cover the object vertically, there needs to be one square downward from the
red point (P,T), whose height is 1/2(=8.75). Therefore the H value is 8.75.
Object
Summary of Contents for PixelPro GXi Series
Page 1: ... FW Version 1 12 0 8 ...