PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
16
PTZ Tab is shown if the model supports PTZ operation or it is Speed PTZ camera.
Movement: The arrow buttons can enable users to move Pan/Tilt.
-Zoom In/Out: Click ‘+’ button to zoom in (Tele) and ‘-‘ button to zoom out (Wide).
-Focus Near/Far: Click ‘+’ button to focus in near and ‘-‘ button to focus in far.
Speed: Adjust the speed of the pan/tilt control.
Pre
Position: Users can preset various positions by numbering different spots of space.
The maximum number of positions that user can set are 255. Clicking GO after a preset
number was selected from the drop-down list will show the corresponding position.
Tour: Tour shows the video stream from the different preposition in a pre-defined order
for intervals. Select the Touring Number and then click the Start button to start the
predefined Touring. If you want to stop Touring immediately, Click Stop button. Please
refer to 5.7.1 Touring for the configuration.
Home Position: One position can be set as the Home position which is readily accessible
by just clicking “Go” or goes to when there is no operation with Autorun.
Please refer to
5.8.3. Autorun for the configuration.
Wiper: This only appear when the camera type is IR speed PTZ. This is located below the
Home Position configuration. If the lens surface needs to be wiped, click the Start button.
After wiping is done, click the Stop button.
PTZ Tab
Summary of Contents for PixelPro GXi Series
Page 1: ... FW Version 1 12 0 8 ...