PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
46
Note
i
Selecting the status of sensor as the event source is dependent on the
configuration of the sensor’s detection type at the sensor/alarm configuration
page. Refer to 5.7.1. Sensor/Alarm for the configuration.
PIR
Select PIR to enable PIR sensor as the event source. There is a hyperlink to access the PIR
configuration page. This feature will appear only for the models supported with PIR function.
Motion detection
Select Motion detection to enable motion detection as the event source.
Select the motion detection zones to use as the event source from the list. (Refer to 5.3.2.
Motion Detection to create the motion detection zones prior to setting motion detection as
the event source.) There is also a hyperlink to access the motion detection configuration page.
VCA source
Select VCA source if you want a certain VCA source as one of the event sources. Available
options may differ by purchased analysis options. There is also a hyperlink to access the VCA
configuration page
Here is the explanation on some major VCA sources.
-
Configuration: When VCA configuration is changed
-
Tamper: When there is camera tampering.
-
Generated from: This mode enables users to set the moments that VCA defines a rule as a
trigger.
-
Start of VCA event: The moment a defined rule begins
-
End of VCA event: The moment a defined rule ends
-
Start/End of VCA event: combination of both Start/End of VCA events
-
Covert VCA event to MD event: This feature enables VCA event message to be converted
to Motion Detection event message.
Face Detection
Select Face Detection to enable Face detection as the event source.
Select the desired detection profile to use as the event source from the list (Refer to 5.3.3.
Face Detection to create face detection zones prior to selecting Face Detection as the event
source.) There is also a hyperlink to access the face detection configuration page.
Note
i
Fisheye camera is not supported with Face Detection.
Summary of Contents for PixelPro GXi Series
Page 1: ... FW Version 1 12 0 8 ...