![background image](http://html.mh-extra.com/html/ganz/pixelpro-gxi-series/pixelpro-gxi-series_user-manual_561092081.webp)
PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
81
If you want to enable this function, tick the checkbox of Enable Auto-Configuration link-local
address, and click Renew if you want to change the IP address.
Caution
!
* IPAdminTool needs to be started in a same network where wireless device is
operating at.
5.4.13. IP Filtering
If you want to control the network traffic to your camera, go to Setup > Network
Configuration > IP Filtering.
Configuration
- Enable: Tick the checkbox if you want to use IP filtering function.
- Always allow ping request: This allows users to ping the camera even if certain IP addresses
are blocked.
- Allow admin IP: The IP address in the IP address box is always allowed to the camera. The
address will be an admin user’s IP.
Policy
- Allow: In Allow mode, IP addresses except those specified in the list of Filtered IP Addresses
are denied.
- Deny: In Deny mode, IP addresses except those specified in the list of Filtered IP Addresses
are allowed.
How to configure IP filtering
1. Tick the checkbox of ‘Enable’.
2. Specify the admin IP (if needed).
3. Choose the policy between Allow mode and Deny mode.
4. Add the IP addresses based on the mode in Policy.
5. Click the Apply button.
Summary of Contents for PixelPro GXi Series
Page 1: ... FW Version 1 12 0 8 ...