PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
53
What is Object size?
The object size value means the proportion of the macro blocks which has exceeded the
configured sensitivity. If you want to configure the zone less sensitive than the factory default
(128), set the number value higher; to configure the zone more sensitive than the factory
default, set the number value lower.
Display Motion Information
-
Show motion blob: Tick the checkbox of show motion blob, and click SAVE to apply if you
want to see which spot has subject’s movement on the screen. Before enabling motion
blobs on the view, enable metadata of stream in RTSP/RTP is pre-requisite. Click the
hyperlink of GO to RTSP/RTP Configuration under the tab of Motion Blob. Or refer to 5.4.5.
RTSP/RTP (multicast or unicast) for the details.
-
Show motion activity: Tick this option to show the graph of motion zone. The red line in
the black box helps users intuitively adjust the Sensitivity and ObjectSize parameters which
is usually useful when installation. If the motion is detected, there will be write graph
shown. When the white graph bar matches with the red line, which means the motion
zone is configured perfectly. In another word, if the motion graph exceeds the red line, an
alarm will be occurred.
Summary of Contents for PixelPro GXi Series
Page 1: ... FW Version 1 12 0 8 ...
