![background image](http://html.mh-extra.com/html/ganz/pixelpro-gxi-series/pixelpro-gxi-series_user-manual_561092051.webp)
PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
51
Send HTTP Notification
GET
Post – For ‘uCount.it’
1. Select the check box to activate the HTTP notification method.
2. Select the HTTP request method either GET or POST.
A. In case you selected the POST method for ‘uCount.it’, select options of ‘Attach thumbnail
(or face image)’ and ‘Attach snapshot’ whether enable or disable.
From the HTTP notification list, select the HTTP server to send the notification. To create a new
HTTP server that is not on the list, go to Setup > Event Configuration > HTTP Notification, and
create a new HTTP server information.
Send TCP Notification
Select the check box to activate TCP notification method. To configure a new TCP server, go to
Setup > Event Configuration > TCP Notification and configure TCP server information.
Send Notification via TCP event server
Select the check box to activate TCP event server notification method. To configure a new TCP
server, go to Setup > Event Configuration > TCP Server and configure TCP server.
Send multicast notification
Select the check box to activate multicast notification, and go to Setup > Event Configuration >
Multicast Notification to configure multicast notification.
Or, go to 5.3.12. Multicast notification for the detail.
Active PTZ
Select the check box, and select the preset position to move to the specific preset position of
PTZ camera. To configure a preset, go to Live > Panel > PTZ > Pre Position.
Note
i
To attach a snapshot image on the configuration of E-mail Recipient or FTP
notification, make sure the snapshot setting from Setup > Video & Audio >
Encoder Profile has been enabled.
Summary of Contents for PixelPro GXi Series
Page 1: ... FW Version 1 12 0 8 ...