![background image](http://html.mh-extra.com/html/ganz/pixelpro-gxi-series/pixelpro-gxi-series_user-manual_561092045.webp)
PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
45
1st group (Detectors)
Sensor (DI#1)
Select Sensor (DI#1) to enable DI as the event source. There are three modes:
-
Active: Selecting Active enables detection of digital input.
-
Inactive: Selecting Inactive enables detection of the ending moment of digital input.
-
Both: combination of Active and Inactive
Note
i
Selecting the status of sensor as the event source is dependent on the
configuration of the sensor’s detection type at the sensor/alarm configuration
page. Refer to 5.7.1. Sensor/Alarm for the configuration.
Alarm(DO#1)
Select Alarm (DO#1) to enable DO as the event source. This feature will appear only for the
models supported with DO. There are three modes:
-
Active: Selecting Active enables detection of digital output.
-
Inactive: Selecting Inactive enables detection of the ending moment of digital output.
-
Both: combination of Active and Inactive
Summary of Contents for PixelPro GXi Series
Page 1: ... FW Version 1 12 0 8 ...