PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
29
Note
i
Image Signal Processing is not available for the thermal camera models.
Note
i
Enable defog is not available for some speed PTZ camera models.
Note
i
The options to adjust the defog level may not be supported on some camera
models.
Video Stabilization
Video Stabilization is used to keep the image stable against camera sway and other unwanted
camera movement. Video stabilization can be enabled / disabled independently for each
individual stream.
In order to keep the output frames steady and aligned to a reference frame, the output frames
are shifted with respect to the input frames. As the camera moves around, the output frames
are shifted to keep the image features aligned with previous frames. This results in areas for
which there is no image data available. The Border In-fill option controls what happens to
those areas that do not contain any image data.
There are three options available:
-
dynamic: The borders uniformly expand and contract in real-time in response to the
amount of camera motion.
-
fixed: A fixed size black border is present on all sides which blanks out the moving edges of
the image. The size of the borders is equal to the maximum frame shift.
-
none: Regions of the output image for which there is no available data are filled with black.
Note
i
The performance of the stabilization may be limited due to the characteristic of
image sensor. The performance is optimized in the frequency range of 1-5 Hz.
Summary of Contents for PixelPro GXi Series
Page 1: ... FW Version 1 12 0 8 ...