PixelPro GXi Series
Web Page User’s Manual V1.12.0.8
07-2017-A
106
- Tour: Configure a profile of Tour via the Tour menu under the OSD main menu. Then,
exit from the OSD menu, press the number button corresponding to the configured Tour
number on the PTZ controller, and press the Tour button to start ‘Tour’.
NOTE: Presets must have been configured to set Tour.
- Pattern: Configure a profile for Pattern via the Pattern menu under the OSD main menu.
Then, exit from the OSD menu, and press the Pattern button to start ‘Pattern’.
Note
i
The additional PTZ Control on the webpage appears only for the encoders
connected to analogue cameras
Note
i
The buttons of Menu Off (On), Enter, Clear, Scan, Tour and Pattern may not
work depending on the each PTZ protocol type. If the buttons do not work,
use the buttons appropriately by reference to your camera’s PTZ protocol
manual.
Setup
Video-In
This part is corresponding to 5.2.1. Camera (Channel naming/video format/color control) in
Video and Audio. Only the different features from cameras will be covered on this part. For the
other common features, refer to 5.2.1. Camera (channel naming/video format/color control).
Video Standard Format
This indicates the current video standard format that is configured by the hardware switch.
Please see the installation guide of the corresponding device for more detailed information.
Summary of Contents for PixelPro GXi Series
Page 1: ... FW Version 1 12 0 8 ...