３５
System Setting
Disk Operations
You can set to delete the recording automatically and set the overwrite options, and you can also
format the HDD recording data.
1. From
<SYSTEM SETUP> - <STORAGE>
,
select
<DISK OPERATIONS>
.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to set the operation
conditions of the disk.
>DISK WRITE MODE
- If it is set to
<OVERWRITE>
, the existing data
will be overwritten by new recording data if the
recording data size exceeds the free space of the HDD.
- If the option is set to
<ONCE>
and the HDD is full, the DVR will stop recording and output the
beep or alarm that is pre-defined at
<EVENT>
.
>RECORDING TIME LIMIT : The recording data will be deleted after a specific time of reservation.
If it is set to
<OFF>
, this function will be disabled.
>DISK FORMAT : format the hard disk.
Note that formatting the HDD will delete all video data and logs.
3. To apply the change, click
<APPLY>
in the bottom of the screen.
4. When done, press the
[EXIT]
button on the remote control or click
<CLOSE>
button.
The confirmation message appears and you will return to the previous menu.
