Gamewell Smart Start IDENTIFLEX 630, Installation & Operation Manual

Page: 79 / 226

IF630 Programming 5/26/01
___________________________________________________________________________________________
Rev 3.0 69
Card ID # Each type of card is assigned a unique 8 bit code that the card transmits to the
CPU when it is polled. In operation each card is periodically polled and returns
its type code. The CPU detects if the card is functioning correctly, for a card type
at that location. Refer to Table L4, IF630 Card ID Type.
Card Location Card No. Card ID Type
Code
(hex value)
Card Description
Display Module Card# 0 0A Alphanumeric (LCD) display card
Bus Driver Module Card# 4 01 Signal Circuit Card
Relay Expander Card Card# 5 02 Relay Card
Bus Driver Module Card# 6 05 Variety of features (city tie
supervision, ground fault, default
power supply supervision, +24 V,
+12V, -12V +5V supervision, V-
battery to power supply, unregulated
raw supply, system on AC/Battery,
Charging Monitor, battery monitor,
aux 1 & 2).
Analog Addressable
Module Card# 17 09 XP95 analog addressable interface (2
or 4 circuits)
Table L4, IF630 Card ID Type
____________________________________________________________________________________________
System Configuration
1. Select [1], the "Config" field.
2. Select “Display” [1], Press " Enter ". ( Figure L-3 is an example of data shown ).
3. The alphanumeric screen will scroll and the user can view desired circuit.
4. Select “Download” [2] to download system configuration to a laptop
computer. Refer to Flex 600 computer/laptop programming manual.
Card 00, ID# 0A is: A/N Panel
Card 04, ID# 01 is: CCM: 2 Sig Ckt, Class A
Card 05, ID# 02 is: CCM: 4 Rel Ckt
Card 06, ID# 05 is: CCM: City Tie, Buzzer etc.
Card 07, ID# 07 is: Unused
Card 17, ID# 09 is: Apollo Interface
Figure L-3
4. Press " Enter " key for previous menu. Figure L-2, is shown.