ENG
ENG - 47
CLEANING AND MAINTENANCE
Disconnect the machine from the power outlet and let it cool down before cleaning.
Bread pan: Remove the bread pan by pulling the handle, wipe inside and outside of pan with
a damp clothes, do not use any sharp or abrasive agents for the consideration of protecting
the non-stick coating. The pan must be dried completely before installing.
Note: Insert the bread pan by pressing lightly until it fixed in correct position. If it cannot be
inserted, adjust the pan lightly to make it is on the correct position then press it down.
Kneading blade: If the kneading blade is difficult to remove from the bread, use the hook.
Also wipe the blade carefully with a cotton damp cloth. Both the bread pan and kneading
blade are dishwashing safe components.
Housing: gently wipe the outer surface of housing with a wet cloth. Do not use any abrasive
cleaner for cleaning, as this would degrade the high polish of the surface. Never immerse
the housing into water for cleaning.
Note: It is suggested not disassembling the lid for cleaning.
Before the bread maker is packed for storage, ensure that it has completely cooled down,
clean and dry, and the lid is closed.
TROUbLE ShOOTING GUIDE
No.
Problem
Course
Solution
Smoke from ventilati
-
on hole when baking
Some ingredients adhere to
the heat element or nearby, for
the first use, oil remained on
the surface of heat element
Unplug the bread maker and
clean the heat element, but be
careful not to burn you, during the
first use, dry operating and open
the lid.
Bread bottom crust
is too thick
Keep bread warm and leave
bread in the bread pan for
a long time so that water is
losing too much
Take bread out soon without
keeping it warm
It is very difficult to
take bread out
Kneader adheres tightly to the
shaft in bread pan
After taking bread out, put hot
water into bread pan and immer
-
ge kneader for 10 minutes, then
take it out and clean.
4
Stir ingredients not
evenly and bake
badly
1.selected program menu is
improper
Select the proper program menu
2.after operating, open cover
several times and bread is dry,
no brown crust color
Don’t open cover at the last rise
3.Stir resistance is too large
so that kneader almost can’t
rotate and stir adequately
Check kneader hole, then take
bread pan out and operate
without load, if not normal, contact
with the authorized service facility.
5
Display “H:HH” after
pressing “start/stop”
button
The temperature in bread
maker is too high to make
bread.
Press “start/stop” button and
unplug bread maker, then take
bread pan out and open cover
until the bread maker cools down
6
Hear the motor noi
-
ses but dough isn’t
stirred
Bread pan is fixed improper
-
ly or dough is too large to be
stirred
Check whether bread pan is
fixed properly and dough is made
according to recipe and the ingre
-
dients is weighed accurately
1)
2)
3)
4)
Summary of Contents for MAP 205 Baguette
