Galil Motion Control DMC-42 0 Series, User Manual

Page: 216 / 218

List of Other Publications
"Step by Step Design of Motion Control Systems"
by Dr. Jacob Tal
"Motion Control Applications"
by Dr. Jacob Tal
"Motion Control by Microprocessors"
by Dr. Jacob Tal
Training Seminars
Galil, a leader in motion control with over 500,000 controllers working worldwide, has a proud reputation for
anticipating and setting the trends in motion control. Galil understands your need to keep abreast with these
trends in order to remain resourceful and competitive. Through a series of seminars and workshops held over the
past 20 years, Galil has actively shared their market insights in a no-nonsense way for a world of engineers on the
move. In fact, over 10,000 engineers have attended Galil seminars. The tradition continues with three different
seminars, each designed for your particular skill set-from beginner to the most advanced.
MOTION CONTROL MADE EASY
WHO SHOULD ATTEND
Those who need a basic introduction or refresher on how to successfully implement servo motion control systems.
TIME: 4 hours (8:30 am-12:30 pm)
ADVANCED MOTION CONTROL
WHO SHOULD ATTEND
Those who consider themselves a "servo specialist" and require an in-depth knowledge of motion control systems
to ensure outstanding controller performance. Also, prior completion of “Motion Control Made Easy" or equivalent
is required. Analysis and design tools as well as several design examples will be provided.
TIME: 8 hours (8:00 am-5:00 pm)
PRODUCT WORKSHOP
WHO SHOULD ATTEND
Current users of Galil motion controllers. Conducted at Galil’s headquarters in Rocklin, CA, students will gain
detailed understanding about connecting systems elements, system tuning and motion programming. This is a
“hands-on” seminar and students can test their application on actual hardware and review it with Galil specialists.
Attendees must have a current application and recently purchased a Galil controller to attend this course.
TIME: Two days (8:30-4:30pm)
Appendices ▫ 212 DMC-42x0 User Manual