Galil Motion Control DMC-42 0 Series, User Manual

Page: 174 / 218

Ordering Options
Overview
The DMC-42x0 can be ordered in many different internal boards, the DMC, ICM, and CMB are required, and the
AMP/SMD are optional. These individual boards have their own set of options that can modify them. This section
provides information regarding the different options available for these different boards. For information on
pricing and how to order a controller with these options, see our DMC-42x0 part number generator on our website.
http://www.galilmc.com/products/dmc-42x0-part-number.php
DMC, “DMC-42x0(Y)” Controller Board Options
The following options are the “Y” configuration options that can be added to the DMC-42x0 part number. Multiple
Y-options can be ordered per board.
-16 bit – 16 bit Analog Inputs
The -16 bit option provides 16 bit analog inputs on the DMC-42x0 motion controller. The standard resolution of
the analog inputs is 12 bits.
Part number ordering example:
DMC-4210(-16bit)-C012-I000
4-20mA – 4-20mA analog inputs
The 4-20mA option converts all 8 analog inputs into 4-20mA analog inputs. This is accomplished by installing 475W
precision resistors between the analog inputs and ground. When using this option the analog inputs should be
configured for 0-10V analog inputs using the AQ command (AQ n,4). The equation for calculating the current is:
I
ma
= 2.105 V
Where I
ma
= current in mA
V = Voltage reading from DMC-42x0
Part number ordering example: DMC-4210(4-20mA)-C012-I000
ETL – ETL Certified DMC-42x0
The DMC-42x0 can be ordered in a configuration that is ETL listed. ETL Mark is shown in Figure A.1.
Part number ordering example: DMC-4210(ETL)-C012-I000
Appendices ▫ 170 DMC-42x0 User Manual
Figure A.1: ETL Mark with (ETL) Option