Gage CompuScope 14100C, Hardware Manual And Driver Installation Manual

Page: 95 / 174

CompuScope 82GC 89
CompuScope 82GC specifications
PLEASE CHECK THE GAGE WEBSITE FOR THE MOST UP-TO-DATE SPECIFICATIONS.
SYSTEM REQUIREMENT
CompactPCI PICMG compliant system with the required number of free 6U slots; controller or PC with 128 MB
RAM, 50 MB hard disk and SVGA video.
There must be at least 10 A of 5 V and 3.3 A of 3.3 V for each CS82GC card
The CompuScope 82GC must be installed in a slot that supports bus mastering to achieve stated performance.
SIZE
6U CompactPCI
Occupies one (1) slot
POWER (IN WATTS)
Worst Case Typical Power Down
+ 5 Volts 50.0 W 46.0 W 7.0 W
+ 12 Volts 5.0 W 4.0 W 4.0 W
+ 3.3 Volts 11.0 W 10.0 W 1.0 W
- 12 Volts 3.0 W 3.0 W 3.0 W
CHANNELS 1 & 2
Inputs per card: 2
†
Impedance: 1 M
Ω
, 25 pF or 50
Ω
, software selectable
†
Coupling: AC or DC
Resolution: 8 bits
†
Typical DC Coupled Bandwidth:
50
Ω Ω Ω Ω
Dual Channel
50
Ω Ω Ω Ω
Single Channel
1 M
Ω Ω Ω Ω
Dual Channel
1 M
Ω Ω Ω Ω
Single Channel
±100 mV N/A N/A 250 MHz 200 MHz
±200 mV 250 MHz 150 MHz 300 MHz 200 MHz
±500 mV 400 MHz 300 MHz 300 MHz 250 MHz
±1 V 400 MHz 300 MHz 300 MHz 250 MHz
±2 V 400 MHz 300 MHz 300 MHz 250 MHz
±4 V 400 MHz 300 MHz N/A N/A
±5 V N/A N/A 300 MHz 250 MHz
±10 V N/A N/A 300 MHz 250 MHz
Lower Frequency Limit
AC Coupled:
1 M
Ω
Input: 10 Hz
50
Ω
Input: 20 kHz
†
Input Voltage Ranges:
1 M
Ω
: ±100 mV, ±200 mV, ±500 mV,
±1 V, ±2 V, ±5 V, ±10 V
50
Ω
: ±200 mV, ±500 mV,
±1 V, ±2 V, ±4 V