Gage CompuScope 14100C, Hardware Manual And Driver Installation Manual

Page: 13 / 174

Installing single or multiple/independent CompuScope CompactPCI/PXI cards 7
6
Fully slide the card into the chassis.
Gently push the card into the chassis until you hear the handles click into position. If necessary, provide
manual assistance in the proper closure of the handles.
Please note that the connectors in the illustration below may not be identical to your CompuScope card.
We are using a CompuScope 14100C for this example, but the card handles work the same way on all the
CompuScope CompactPCI/PCI cards.
Figure 5: Slide the card until the handles click (CS14100C shown)
7 Fasten the card to the chassis using the screws embedded in the card handles.
Figure 6: Fasten the card to the chassis using screws (CS14100C shown)