Gage CompuScope 14100C, Hardware Manual And Driver Installation Manual

Page: 79 / 174

CompuScope 85GC 73
CompuScope 85GC compliance statement
Category Standards or description
EC Declaration of
Conformity – EMC Meets intent of Directive 89/336/EEC for Electromagnetic Compatibility.
Compliance was demonstrated to the following specifications as listed in the
Official Journal of the European Communities:
EN 61326 EMC requirements for Class A electrical equipment for
measurement, control and laboratory use.
1, 2, 3
IEC61000-4-2 Electrostatic Discharge (Performance criterion B)
IEC61000-4-3 RF Electromagnetic Field (Performance criterion A)
IEC61000-4-4 Electrical Fast Transient/Burst Immunity
(Performance criterion B)
IEC61000-4-5 Power Line Surge Immunity
(Performance criterion B)
IEC61000-4-6 Conducted RF Immunity (Performance criterion A)
IEC61000-4-11 Voltage Dips and Interruptions Immunity
(Performance criterion B)
EN 61000-3-2 AC Power Line Harmonic Emissions
Australia / New Zealand
Declaration of
Conformity - EMC Complies with EMC provision of Radio communications Act per the following
standard(s):
AS/NZS 2064.1/2 Industrial, Scientific and Medical Equipment: 1992
1, 2, 3
1. High-quality shielded cables must be used to ensure compliance to the above listed standards
2. Compliance demonstrated on a single card configuration
3. On the host PC used by the customer, all unused back panel slots must be covered with EMI
blocking plates