Gage CompuScope 14100C, Hardware Manual And Driver Installation Manual, Page: 161 / 174

CompuScope 3200C 155
CompuScope 3200C specifications
PLEASE CHECK THE GAGE WEBSITE FOR THE MOST UP-TO-DATE SPECIFICATIONS.
SYSTEM REQUIREMENTS
CompactPCI PICMG compliant system with the required number of free 6U slots; controller or PC with 128 MB
RAM, 50 MB hard disk and SVGA video.
SIZE
6U CompactPCI
2MB Memory Model:
Occupies 1 slot
Other memory versions: Occupies 2 slots
POWER
Typical: 26 Watts
Worst: 28.6 Watts
INPUT
Input Connector: 68 Pin MDR connector
No. of Data Lines: 32, 16 or 8, software selectable
Input Type: Single Ended or Differential, factory set.
Cannot be modified in the field
Input Levels:
Single Ended: CMOS (0 to 5 Volt),
CMOS (0 to 3.3 Volt)
Differential: ECL or PECL
CLOCK
Internal Clock Rate:
MHz: 100, 50, 20, 10, 5, 2, 1
kHz: 500
External Clock: Standard
External Clock Type: Single Ended or Differential, set to the same type as data lines
External Clock Level: Set to the same type as data lines.
CMOS/TTL inputs are 3.3 V tolerant
Single Ended: CMOS (0 to 5 Volt),
CMOS (0 to 3.3 Volt),
TTL (0 to 5 Volt)
Software selectable
Differential: ECL,
PECL
Software selectable
Max. Ext Clock Freq: 100 MHz
Min. Ext Clock Freq: DC
Impedance: 50
Ω