Gage CompuScope 14100C, Hardware Manual And Driver Installation Manual

Page: 162 / 174

156 CompuScope 3200C
TRIGGERING
Source: Ext Trigger or Software
External Trigger: Standard
Trigger Type: Single Ended or Differential, set to the same type as data lines
Trigger Level: Set to the same type as data lines.
CMOS/TTL inputs are 3.3 V tolerant
Single Ended: CMOS (0 to 5 Volt),
CMOS (0 to 3.3 Volt),
TTL (0 to 5 Volt)
Software selectable
Differential: ECL
PECL
Software selectable
Slope: Positive or Negative
Post-Trigger Depth: 8 bits: 256 point minimum
128 point resolution
16 bits: 128 point minimum
64 point resolution
32 bits: 64 point minimum
32 point resolution
MEMORY MODE OPERATION
Data Storage: In on-board memory
On-board Memory Size: 2MB
256MB
2GB (other memory sizes available upon request)
8 Bits Width: Sample depth = card memory
16 Bits Width: Sample depth = card memory ÷ 2
32 Bits Width: Sample depth = card memory ÷ 4
MULTI-CARD SYSTEMS
Operating Mode: Multiple/Independent
(Master/Slave available upon request)
OPERATING SYSTEMS SUPPORTED
•
Windows 98/ME/NT* CompuScope Driver version 3.60.30
* Version 4, SP3 or higher
•
Windows 2000**/XP CompuScope Driver version 3.82.xx
** SP1 or higher
APPLICATION SOFTWARE
GageBit Application for Win 95/98/ME, Win NT/2000/XP