4. Usage and Maintenance
Replacing Brake Light Bulb
1.
Switch off the Start or Ignition switch.
2.
Remove the rear combination light
(please refer to Page 356).
3.
Turn the socket (1) with the bulb of the brake
light in the direction of the arrow and remove
it.
4.
Remove the bulb (1) in the direction of the
arrow.
5.
Generally, install in the reverse order of
removal procedures.
Replacing Rear Position Light
The rear position light and rear combination light
should be seen as an entirety. Only LED bulbs are
used. It's not allowed to replace any set of LEDs
separately in repair work. If one set of LEDs are
broken, more load will be applied to the other
intact LEDs, which will significantly shorten their
service life.
In case of any failure of the rear position light,
please have your car checked and repaired at
GAC MOTOR dealer as soon as possible.
289
