2. Operating System and Equipment
99
In case of emergency, use the hazard warning
indicator light to attract the attention of other
people on the road, so as to reduce the risk of
accidents. Turn it on in one of the following
conditions:
•
Vehicle breakdown due to technical failure.
•
At the end of traffic flow during traffic jam.
•
Towing another vehicle or being towed.
Caution
•
The hazard warning indicator light will
consume battery. Turn them off if
permitted.
• Follow the relevant laws and
regulations when using the hazard
warning indicator light.
●
If the hazard warning indicator light
fails in emergency, other warning
means must be taken to attract
attention of other people on the road
provided that these means are safe and
comply with relevant traffic
regulations.
Collision Warning Light
In case of collision, left and right turn signals flash.
Lighting for Getting on the Car
–
By pressing on the smart key when you
get close to the car, the position lights will be
on for 25 seconds as auxiliary lighting so that
you can see clearly obstacles if any.
If
on
the smart key is pressed again, the
position lights will be on for another 25
seconds.
-
If the Start switch or ignition switch is switch
to “ON” position after getting on the car, the
position lights go out.
Lighting for Locating the Car
– If on the smart key is pressed twice
successively, the position lights will be on for
8 seconds and left and right turn signals will
flash 3 times so that the car can be located
easily.
