background image

4. Usage and Maintenance

Warning 

Engine oil is a type of highly
combustible material. Be careful to add
the engine oil and do not sprinkle the
engine oil onto the scorching hot
engine parts or exhaust system piping.

If too much engine oil is filled, please
do not start the engine, and contact
GAC MOTOR dealer for treatment.
Otherwise, the three-way catalytic
converter may be damaged.

After completing the filling, the engine
oil filler cap must always be tightened,
so as to prevent the engine oil from
spilling when the engine is operating
and avoid fire.

Replacing Engine Oil

 

Replace the engine oil as per the intervals 
specified in the Warranty Manual at GAC MOTOR 
dealer. 

 

If the car is used under severe conditions, or fuel 
oil with higher sulfur content is used, or short-
distance traveling frequently occurs, or the car will 
idle for a long time (e.g. taxi), or the car will travel 
in high dust area, or the car will frequently travel 
with drawbar trailer, or the car will be used in high 
and cold area, increase the number of 
maintenance times or reduce the maintenance 
period of several maintenance items between 
periodic maintenances.

 

Warning 

Never replace the engine oil by yourself 
unless you have relevant expertise. 

Be sure to operate after the engine
cools down, so as to prevent scald by
high temperature engine oil.

To prevent engine oil from getting into
your eyes, be sure to wear goggles
when replacing the engine oil.

When unscrewing the oil drain plug, be
sure to place your arm horizontally to
prevent the oil from flowing along it.

If the engine oil splashes on the skin,
rinse it thoroughly.

Put the used oil into a special container
which is large enough to contain all
used oil.

Do not store the used oil in a food
container or any other non-original
container to avoid confusing, resulting
in poisoning.

As engine oil is toxic, please first put it
on a safe place to prevent children from
touching it before disposing it.

265

Summary of Contents for GAC7130H2A5





































































































































































































































































































































































Reviews: