3. Driving Guide
3.1.7
Mechanical Parking Brake System
(applicable to certain models)
Apply the mechanical parking brake
-
Pull the handle of mechanical parking brake
up to limit to apply the mechanical parking
brake, when the mechanical parking brake
state is removed.
Release the mechanical parking brake
-
Pull the handle of mechanical parking brake
up slightly, press the button - 1 - in front of
the handle, and press the handle to full range
to release the mechanical parking brake.
Warning
Make sure to apply the mechanical parking
brake after parking.
●
When the start switch or ignition switch
is in the “ON” position and when the
mechanical parking brake is applied,
the
indicator light is on; When the
mechanical parking brake is removed,
the
indicator light is off.
●
When the vehicle is in driving process,
it is not allowable to decrease the
speed by using mechanical parking
brake, because the mechanical parking
brake only exerts power on the rear
wheels, which can easily cause traffic
accidents.
●
It is forbidden to drive the vehicle when
the parking brake has not been
completely separated. Otherwise, it will
cause the overheating of the rear wheel
brake, reduce the braking efficiency,
and cause the friction lining of rear
wheel brake to wear out prematurely.
222
