4. Usage and Maintenance
4.4.4
Windshield Washing Liquid and
Wiper Blade
Adding Windshield Washer Fluid
Windshield cleaning device will have its washing
liquid supplied by the washing fluid tank in the
engine compartment. Each time before using the
washing liquid, if the washing liquid level is found
to be too low, timely add washing liquid into the
washing liquid tank.
Pure water is difficult to completely clean the
windshield, so washing liquid additive accepted by
GAC MOTOR must be added into the pure water;
please prepare the washing liquid according to the
proportion specified in the outer packing of
additive.
Warning
●
Carefully read and fully follow relevant
warnings before operation in engine
compartment.
●
The engine compartment is a high-risk
area. Before opening the engine hood,
please carefully read and comply with
relevant warnings and instructions.
●
Windshield washing liquid shall not be
added with coolant or any other
additive. Otherwise, oil stain may
remain on the windshield when
cleaning the windshield, which will
seriously influence the forward
visibility, and is very easy to cause
accident.
Caution
Do not mix the windshield washer fluid with
other cleaning agents. Doing so may cause
the washer fluid to be decomposed,
blocking the windshield washer nozzle.
Replacing Front Windshield Wiper Blade
-
Switch the Start or Ignition switch to “ON”
gear, and then to “OFF/LOCK” gear.
-
Within 10s after finishing the last step, move
the wiper combination switch to
gear.
By this time, the wiper arm will move for half
circle.
271
