4. Usage and Maintenance
3.
Remove the bulb (1) of the front turn signal.
4.
Generally, install in the reverse order of
removal procedures.
Replacing Front Position Light
The front position light and front combination light
should be seen as an entirety. Only LED bulbs are
used. It's not allowed to replace any set of LEDs
separately in repair work. If one set of LEDs are
broken, more load will be applied to the other
intact LEDs, which will significantly shorten their
service life.
In case of any failure of the front position light,
please have your car checked and repaired at
GAC MOTOR dealer as soon as possible.
Replacing Daytime Running Light (apply to
certain models)
The daytime running light and front combination
light should be seen as an entirety. Only LED
bulbs are used. It's not allowed to replace any set
of LEDs separately in repair work. If one set of
LEDs are broken, more load will be applied to the
other intact LEDs, which will significantly shorten
their service life.
In case of any failure of the daytime running light,
please have your car checked and repaired at
GAC MOTOR dealer as soon as possible.
Replacing Front Fog Light Bulb
The front fog light is installed on the bumper and
it is hard to assemble and disassemble. Therefore,
in case of any failure of the front fog light, please
have your car checked and repaired at GAC
MOTOR dealer as soon as possible.
286
