3. Driving Guide
3.1.3 Engine
Start
Vehicle Models with Manual Transmission
Vehicle Models with Ignition Switch
–
Insert the mechanical key into the ignition
switch.
–
Depress the brake pedal and clutch pedal to
and maintain it at the full range, and make
sure the shift lever is at neutral gear.
–
Turn the mechanical key to switch the
ignition switch to “START” position, thus the
engine is started.
Vehicle Models with Start Switch
–
Carry the intelligent remote control key to
enter the car with you.
–
Depress the brake pedal and clutch pedal to
and maintain it at the full range, and make
sure the shift lever is at neutral gear and the
start switch indicator light is green.
–
Depress the start switch to start the engine.
Vehicle Models with Automatic Transmission
Vehicle Models with Ignition Switch
–
Insert the mechanical key into the ignition
switch.
–
Depress the brake pedal and maintain it at
the full range, and make sure the shift lever
is at “P” or “N” position.
–
Turn the mechanical key to switch the
ignition switch to “START” position, thus the
engine is started.
Vehicle Models with Start Switch
–
Carry the intelligent remote control key to
enter the car with you.
–
Depress the brake pedal and maintain it at
the full range, and make sure the shift lever
is at “P” or “N” position and the start switch
indicator light is green.
–
Depress the start switch to start the engine.
Hint
●
If the engine is of cold start, it needs
idle running to let it warm up before
driving. At the same time, because
valve lifter takes a few seconds to
reach normal working pressure, it can
produce running noise, which is
normal phenomenon, requiring no
worry.
●
If models with start switch cannot start
the engine normally caused by brake
signal, speed failure, or low
temperature in winter and other
reasons, it can try to switch the start
switch to the “ACC”
position
, ensure
the transmission shift lever in “P” or
“N”
position
, and press start switch for
15 seconds, and then start the engine
forcefully.
206
