2. Operating System and Equipment
95
Lane Change Flashlight
–
Switch the Start switch or ignition switch
to “ON” position
– By pushing quickly (within 0.1 to 0.7 seconds)
the light combination switch lever up or down
to position 2, and then releasing it to let it
return to the original position, the
corresponding turn signal flashes three times,
and the turn signal indicator in the instrument
cluster also flashes three times.
–
By pushing the light combination switch lever
up or down to position 2 and keeping it at this
position, the corresponding turn signal and
also the turn signal indicator in the instrument
cluster flash continuously. If the lever is
released to let it return to the original position,
the flashing stops.
Headlight High Beam
–
Switch the Start switch or ignition switch
to “ON” position
–
Turn the light switch to
position.
–
By pushing forward (forward direction of the
car) the light combination switch lever to
position 3, headlight high beams are turned
on and
in the instrument cluster flashes.
–
By pulling back (backward direction of the car)
the light combination switch lever to position
4, headlight high beams are turned off,
in
the instrument cluster is off, but headlight low
beams are still on.
–
By turning the light switch to
position
, all
lights are turned off.
Warning
Headlight high beams may dazzle the
drivers of other cars nearby and result in
accidents. Please use them properly.
Headlight Low Beam
–
Switch the Start switch or ignition switch
to “ON” position
–
When the light combination switch lever is at
position 4, turn the light switch to
position to turn on headlight low beams.
–
By turning the light switch to
position
, all
lights are turned off.
