6.
Handling of Accident
Removing the Flat Tire
–
Remove the wheel bolts with the wrench with
the tire off the ground.
–
Remove the flat tire.
Installing the Spare Tire
–
Mount the spare tire on the vehicle.
–
Put all wheel bolts back, and pre-tighten
them with the wrench.
–
Lower the vehicle.
–
Tighten all wheel bolts with the wrench.
Caution
●
Tighten them in diagonal sequence.
●
After installing the wheel, go to GAC
MOTOR dealer to inspect the tightening
torque of wheel bolts as soon as
possible (which is 120±10 N·m).
Warning
Keep the threads of the wheel bolts and hub
clean, and make sure the bolts can be
screwed easily. No grease or other
attachment is permitted.
Notification of Tire Replacement
●
The replaced tire shall be timely and correctly
placed into the spare tire installation position.
●
Clean the tools and put them to the original
position after use.
●
Check the tightening torque of the wheel
bolts as soon as possible.
●
Change the damaged tire as soon as
possible.
●
When a tire is replaced, if any bolt is corroded
or difficult to screw, replace it and clean the
threaded hole before checking the wheel
bolt’s tightening torque.
Caution
The spare tire/replaced tire must be
securely fixed on the spare tire installation
position.
324
