212
5. Driving guide
Interface description
①
Indicates the steering assist control state
and the driver’s hand-held steering wheel
state:
-
The middle steering wheel icon turns
green when the steering assist control is
activated, and white when standby.
-
The hands icon on the steering wheel icon
is always on when the driver is holding the
steering wheel.
-
The hands icon flashes when the driver’s
hands are detected to be off the steering
wheel.
②
ACC indicator lamp
③
Stored cruising speed
④
Set cruising distance from the lead vehicle
⑤
Detected lead vehicle
⑥
Lane marking
-
The lane marking is displayed in gray
when not detected by the system, and
white when being detected by the system.
-
The lane marking is displayed in green
when the ICA steering assist control
is activated or when the LKA steering
corrective adjustment functions.
-
It will turn red if LKA gives an alarm.
Activating ICA
Press
, then the ACC indicator lamp turns
from white
or to green. The steering
assist indicator lamp also turns from white
to green , indicating that ICA is on. At this
time, both the ACC and steering assist control
of the system are activated.
The steering assist depends on the lane
markings set on the road surface. The steering
assist indicator lamp may still be white after the
ICA switch is pressed. After the system detects
a valid lane marking, the steering assist will be
automatically activated and the steering assist
indicator lamp will turn green.
Please pay attention to the following operations
before you enable ICA; otherwise, the function
cannot be enabled, and meanwhile, a text
indication that working conditions of the system
are not met pops up on the instrument panel.
-
Close all doors properly.
-
Fasten the seat belt.
-
Set the gearshift lever to D position.
-
Release the brake.
NOTE
For more precautions, see ACC
.
Summary of Contents for EMPOW
Page 350: ...344 9 Environmental protection information...
Page 356: ...VI Index...