319
8. Accident handling
-
Press the power button to start to inflate
the tire, and observe the change in the
indicated pressure on the tire pressure
gauge. When the indicated pressure
reaches the standard pressure, cut off the
power to stop inflating the tire.
NOTE
The standard tire pressure label is attached
to the B-pillar on the driver’s side.
Tire sealer
The tire sealer should be used as follows:
-
Take out the inflator pump and the tire
sealer from the trunk.
-
Shake the bottle and connect the
connector of inflator pump with the inflator
tube fitting.
CAUTION
● The tire sealer bottle shall not be placed
upside down.
● The tire sealer is not edible, so
inhalation or swallowing shall be
avoided. If it is ingested into the body by
accident, please don’t induce vomiting
and go to hospital immediately.
● Protect your skin or eyes against the tire
sealer; otherwise, it may cause irritation
to your skin or eyes. If the tire sealer
touches the skin accidentally, it can be
thoroughly cleaned with water and soap;
If the tire sealer accidentally enters
the eyes, immediately rinse with clean
water. If you feel unwell, seek medical
attention immediately.
Summary of Contents for EMPOW
Page 350: ...344 9 Environmental protection information...
Page 356: ...VI Index...
