175
5. Driving guide
Limphome mode
If the smart key battery is low and the
instrument cluster display prompts “No key
detected”, you can try to place the smart key
horizontally at the key mark at the bottom of
the armrest box, and then press the START/
STOP button to switch to the “ACC” or “ON”
gear, or press the brake pedal, START/STOP
button the backlight color turns green, and
press the START/STOP button to start the
engine.
This method is intended for emergency start.
Please replace the battery of the intelligent
remote control key as soon as possible.
5.1.2 Start the engine
-
Enter the vehicle with the intelligent
remote control key.
-
Make sure the gear is in “P” or “N”.
-
Step on the brake pedal to ensure that the
backlight color of the START/STOP button
is green
-
Press the ENGINE START/STOP button
to start the engine.
NOTE
In case of a cold start, run the engine at
idle speed to warm up it before driving. At
the same time, the valve tappet takes a
few seconds to reach the normal working
pressure and operation noise will occur,
which is normal.
CAUTION
● The engine start time shall not exceed
15s. If the engine is not started
successfully, you must wait about 30s
before next attempt.
● Do not depress the accelerator pedal
hard to make the engine run at high
speed or overload after starting.
Otherwise, the engine is likely to be
damaged.
● If the battery level is low and the engine
cannot be started, try to start it by a
● It is prohibited to start the engine by
pushing or towing the vehicle.
Summary of Contents for EMPOW
Page 350: ...344 9 Environmental protection information...
Page 356: ...VI Index...