GAC MOTOR EMPOW, Manual, Page: 110 / 356

104
4. Operation of systems and equipment
- Adjust the wiping sensitivity by turning the
knob / ⑦ up/down.
CAUTION
● If the instrument cluster displays “Sensor
Failure, Please Manually Control Wiper”,
for the sake of safety, you should
manually control the wiper and go to
the GAC Motor authorized shop for
inspection in time.
● Before activating the automatic wiping
function in winter, please check whether
the wiper blade is frozen.
● It is recommended to deactivate the
automatic wiping function when washing
the vehicle, in dusty weather and in
rainless weather to avoid unintentional
action of the wipers which may cause
damage or personal injury.
● The automatic wiping function is an
assist, so the driver should manually
operate the wipers when necessary
according to the driving situation to
ensure driving safety.
INT: Intermittent wiping operation *
- If the wiper combination switch is turned
to the ③ INT position, the front wiper will
start wiping intermittently.
- For the models equipped with the
automatic wiping function, this function
can be activated by setting the AV system
“System Settings → Body Accessories →
Other Accessories → Auto Wiping”.
- Adjust the intermittent wiping speed by
turning the knob
⑦
up/down.
LO: Low-speed wiping
- If the wiper combination switch is turned
to the ④ LO position, the front wiper will
wipe at a slow speed.
HI: High-speed wiping
- If the wiper combination switch is turned
to the
⑤
HI position, the front wiper will
wipe at a high speed.
Front windshield washer system on
- If the wiper combination switch is turned
toward the rear of the vehicle to the
⑥ position, the front washer will start
spraying water and then the front wiper
will start wiping.
- If the wiper combination switch is released
to return to its original position, the front
windshield washer system will be stopped
and the front wiper will wipe once after 6s.
- After the front wiper stops wiping for 6 s,
it will wipe once again so as to clear the
residual water stains from the glass.
Front wiper maintenance
- Within 10 s after turning the vehicle power
switch to the “OFF” position, if you turn
the control lever of the wiper combination
switch to the MIST position and then
quickly release it to return it to the original
position, the front wiper will move to the
highest position and then stop.