background image

194

5. Driving guide

Release static park brake

When the vehicle power switch is set to 

“ON” position, depress the brake pedal.

Press the EPB button. The button 

indicator lamp and the indicator lamp 

 on the instrument cluster will go 

out, indicating that the EPB has been 

released.

   NOTE

●  If  the  EPB  button  is  pressed  without 

depressing the brake pedal, the EPB will 

not be released, and the instrument cluster 

will give a visible warning tell-tale together 

with an audible beep alarm.

●  When the EPB is being released, operation 

noise will occur, which is normal.

●  When the battery power of the vehicle is 

insufficient, the system cannot deactivate 

the EPB. If conditions permit, jumper cable 

emergency start 

=> See page 

335

 before 

deactivating the parking brake. Please 

contact GAC Motor authorized shop for 

handling. 

●  If the EPB has not been used for a long 

time, the system will perform automatic 

test, and operation noise will be heard at 

this time.

Application of dynamic emergency brake

If the service brake fails while the vehicle 

is in motion, try to continuously pull up 

the EPB button to achieve emergency 

braking. Release the EPB button or 

depress the accelerator pedal and the 

system exits the emergency braking. 

Summary of Contents for EMPOW





































































































































































































































































































































































Reviews: