GAC MOTOR EMPOW, Manual, Page: 209 / 356

203
5. Driving guide
Interface description
① Indicates the detected vehicle ahead.
②
ACC indicator lamp:
- The green ACC indicator lamp
illuminates to indicate that the ACC is
active with target vehicle ahead. The
white ACC indicator lamp is on,
indicating that ACC is not activated and
there is target vehicle ahead.
- The green ACC indicator lamp is on,
indicating that ACC is active and there
is no target vehicle ahead. White ACC
indicator lamp lit Indicates that the
ACC is working and there is no target
vehicle ahead.
- A yellow light indicates a fault in the
ACC and should be serviced by the GAC
Motor authorized shop in time.
③ Indicates the cruising speed of storage.
④ indicates the set cruising distance from
the vehicle ahead.
When the ACC braking capacity is insufficient
to maintain a proper distance between this
vehicle and the vehicle in front, the system will
send out the “driver takeover request”, and
the instrument cluster will display the alarm
information and sound at the same time. At
this time, the driver shall step on the brake
pedal according to the system requirements to
reduce the speed.
Activating ACC
- Press the button, the corresponding
green indicator lamp in the instrument will
light up, and the vehicle will enter the ACC
control state.
NOTE
● The minimum cruising speed that can
be set is 30 km/h.
● When the gear is not forward gear, it
cannot enter ACC control.