241
5. Driving guide
5.4.12 R e a r a p p r o a c h a l e r t
system*
The rear approach alert function monitors the
target directly behind the vehicle in real time
through the BSD sensor installed at the rear of
the vehicle. When the driver drives the vehicle
normally on the road and there is a target
rapidly approaching in this lane behind, the
system will send out an alarm message and a
rear-end collision warning signal to the vehicle
behind.
CAUTION
The rear approach alert function is only
for assist and cannot replace the driver
to monitor the external traffic conditions.
The driver should always be alert to the
surrounding environment..
On and Off
When the vehicle power switch is in the
“ON” gear, access the AV system “System
Settings → Driving Assistance → BSD Driving
Assistance”, select “Rear approach alert
system”, and press the right
soft button to
set it on or off.
NOTE
The system has the button state memory
function, so that when the vehicle is
restarted, the system will work at the state
before last shutdown.
How it alerts the driver
The rear approach alert function automatically
activates and quickly flashes the hazard
warning lamps to alert the rapidly approaching
vehicles behind.
Summary of Contents for EMPOW
Page 350: ...344 9 Environmental protection information...
Page 356: ...VI Index...
