222
5. Driving guide
On and Off
-
When the vehicle power switch is in
“ON” position, the FCW and AEB are
automatically turned on.
-
Turn on or off FCM and AEB through the
AV system “System setting → Driving
assistance → Llongitudinal driving
assistance”.
-
When the FCW and AEB are turned off, a
secondary confirmation window will pop
up on the multi-function touch screen. At
that time, click “Confirm” or “Cancel” to
confirm the switch operation.
NOTE
● Access the AV system “System Setup
→ Driving Assistance → Longitudinal
Driving Assistance → FCW distance”
and set “Far, Medium and Near”. The
FCW distance has a memory function to
remember the last set warning distance.
● When the FCW and AEB are turned
off, the system will no longer warn the
vehicle and pedestrian targets or brake
the vehicle.
● After the FCW or AEB is turned
off, the vehicle power switch is set
from the “OFF” position to the “ON”
position again, the FCW and AEB are
automatically turned on by default.
WARNING
● The FCM can improve the driving
safety, but it is still subject to the
limitations of laws of physics, and
thus shall never be used for risky
driving. The driver must always be
ready to apply the brake to reduce
the vehicle speed or avoid obstacles.
● The FCM only provides warning and
collision mitigation for vehicles/
pedestrians detected by the radar
and camera, so there may be no
response or a certain delay in the
response. Therefore, the driver shall
apply the brake if necessary instead
of waiting for the FCM to operate.
● The FCM only provides the driver
with warning to avoid collision and
limited braking to mitigate collision
injuries, and cannot prevent a
vehicle accident or injuries on its
own. The driver must always keep
control of the vehicle and take full
responsibility for the vehicle speed
and the distance from other vehicles.
Summary of Contents for EMPOW
Page 350: ...344 9 Environmental protection information...
Page 356: ...VI Index...
