manualshive.com logo in svg

Furuno DS-60, Operator'S Manual

The Furuno DS-60 is a cutting-edge marine radar capable of delivering highly accurate and detailed information about surrounding vessels and objects. With its advanced features and exceptional performance, it ensures the safety and efficiency of various marine activities. Download its free Brochure & Specs manual from manualshive.com to unlock the full potential of this remarkable product.

Share
Download
background image

5.  OTHER OPERATIONS

5-4

5.2

Key Beep On/Off

A key beeps when it is pressed. You can turn this beep on or off.

1. Press the 

MENU/ESC

 key to open the menu.

2. Select [Key Beep] then press the 

ENT

 key.

3. Select [ON] or [OFF] then press the 

ENT

 key.

4. Press the 

DISP

 key to close the menu.

5.3

How to Adjust Key Dimmer

You can adjust the dimmer for the keys as follows:

1. Press the 

MENU/ESC

 key to open the menu.

2. Select [Key BRILL] then press the 

ENT

 key.

3. Select a dimmer level then press the 

ENT

 key. The higher the figure, the higher 

the dimmer level.

4. Press the 

DISP

 key to close the menu.

Summary of Contents for DS-60































































































Reviews:

No comments

Related manuals for DS-60

Brands by name

Popular brands

Load more brands