manualshive.com logo in svg

Furuno DS-60, Operator'S Manual

The Furuno DS-60 is a cutting-edge marine radar capable of delivering highly accurate and detailed information about surrounding vessels and objects. With its advanced features and exceptional performance, it ensures the safety and efficiency of various marine activities. Download its free Brochure & Specs manual from manualshive.com to unlock the full potential of this remarkable product.

Share
Download
background image

4.  SPEED GRAPHIC DISPLAY

4-3

5. The cursor is selecting [Astern SPD Scale]; press the 

ENT

 key.

6. Select the scale range for the astern speed then press the 

ENT

 key.

7. Select [Ahead SPD Scale] then press the 

ENT

 key.

8. Select the scale range for the ahead speed then press the 

ENT

 key.

9. Press the 

DISP

 key to close the menu.

4.3

How to Select the Display Format for the Speed 
Graphic

The speed graphic can show absolute speed or ahead and astern speeds. Absolute 
speed is shown in three digits and ahead and astern speeds in four digits.

1. Press the 

MENU/ESC

 key to open the menu.

2. Select [Speed Select] then press the 

ENT

 key.

Summary of Contents for DS-60































































































Reviews:

No comments

Related manuals for DS-60

Tritech StarFish Quick Start Manual preview
StarFish
Brand: Tritech Pages: 2

Brands by name

Popular brands

Load more brands